Fleck 2900 2″ Single Tank Commercial Metered Softener

This is a 2″ full flow Fleck 2900S single water softener with NXT2 controller and 2″ Clack meter. It is a very heavy-duty system capable of continuous flow and is available in 120,000 to 600,000 Grain Capacities.

Features

• Full 2.0″ valve for high flow rates
• Utilizes high-capacity ion-exchange resin
• Utilizes NXT2 Programmable Controller
• Up to 600,000 Grains Maximum Capacity
• User friendly Fleck 2900S control valve with NXT2 Control
• The NXT2 Network Controller uses on-board communication capabilities to link multiple commercial valves (via off-the-shelf CAT5 or better cables) for a variety of system types.
• Safety brine valve with air check
• Tank Information:
• 100% composite fiberglass construction
• Outstanding performance and durability in harsh chemical environments
• Absolutely will not – and cannot – rust
• Requires no maintenance
• Materials of Construction: Polyethylene inner shell (PVDF available)
• Operating Parameters:
• Maximum operating pressure: 100 psi
• Maximum operating temperature: 110F
• Minimum burst at 600 psi
• Tested to 250,000 cycles without leakage
• NSF Certified
• ASME Tanks Available Upon Request
• Uses “HUB & LATERAL DISTRIBUTORS”
• 5 Year Warranty on Valve, Electronics, & Tanks
  *Ask to see written copy

Specifications

Model # Resin Capacity Continuous
Flow Rate 140-29-120-S-4M
VIEW DRAWING 4.0 cu/ft 120,000 grains 40 GPM 140-29-150-S-4M
VIEW DRAWING 5.0 cu/ft 150,000 grains 50 GPM 140-29-210-S-4M
VIEW DRAWING 7.0 cu/ft 210,000 grains 55 GPM 140-29-300-S-4M
VIEW DRAWING 10.0 cu/ft 300,000 grains 60 GPM 140-29-450-S-4M
VIEW DRAWING 15.0 cu/ft 450,000 grains 75 GPM 140-29-600-S-4M
VIEW DRAWING 20.0 cu/ft 600,000 grains 100 GPM Peak Flow Rate Backwash
Flow Rate Resin Tank Brine Tank 57 GPM 7 GPM 16″ x 65″ 24″ x 50″ 62 GPM 10 GPM 18″ x 65″ 24″ x 50″ 77 GPM 12 GPM 21″ x 62″ 24″ x 50″ 95 GPM 15 GPM 24″ x 72″ 30″ x 48″ 140 GPM 25 GPM 30″ x 72″ 39″ x 48″ 140 GPM 35 GPM 36″ x 72″ 50″ x 60″