US Water System for Anti-Scalant Injection Commercial Reverse Osmosis Systems

Features

Child resistant lid
Polyethylene construction is lightweight and rugged
Translucent White
Stainless Steel Screws
Includes US Water Hyper-Guard Plus 7000 Anti-Scalant

Dimensions

35-Gallon Translucent White Tank: 19 x 19 x36 in
35 Pounds

Includes

5 GPD Pump
35 gallon tank
3 Connecting nuts (1/4″ or 3/8″)
3 Ferrules w/1/4″ & 6 mm OR 2 ferrules w/3/8″
1 Injection check valve (100 psi) OR (1) injection fitting (25 psi)
1 Weighted strainer
1 20′ Roll of suction/discharge tubing 1/4″ white
1 Spare pump tube
1 Mounting bracket
1 Installation and maintenance manual

Featuring the Classic Series metering pumps which are self-priming and the 3-point roller assembly provides a positive 2-point seal on the pump tube at all times. This eliminates the need for anti-siphoning valves and diaphragms. The patented mechanical feed rate control (adjustable models) allows the pump’s output to be scaled from 5% to 100% with the simple turn of the dial.

Adjustable Output (GPD): 0.3 to 5.0
RPM:44
Motor HP: 1/30
6′ power cord attached
Dimensions are 10″ x 6″ x 5.5″
The Stenner 85MHP5 Pump uses a #1 Tube

Features

Peristaltic Design – self-priming, can run dry without damage
Chemicals are metered without exposure to air
Pumps gaseous solutions
Accepts a variety of chemicals – refer to chemical compatibility guide
All housings manufactured from Lexan Polycarbonate Plastic
Manufactured in USA since 1957

WARNING!

Anti-scalant is shipped as a concentrated solution. This concentrated solution must be mixed with clean RO or Distilled water to the proper level for each system specifically. A water analysis and RO system flow rates must be used to figure the site specific mixture and dose rate. You must call1-800-608-8792and make arrangements to send your water analysis and flow rate info to our engineers to give you the site specific dosage and mixture. Over or Under concentrated solutions could damage the RO membranes.