HC/40-20 | Harmsco Hurricane 40 cartridges are made of pleated polyester media for long life and high dirt holding capacity.

Features

• Fewer cartridges for fewer change-outs and lower maintenance cost
• Pleated Polyester-Plus filter media provides higher flow rates and lower initial pressure drop
• Pleated surface area provides higher loading capacity for longer filter life and increased particle removal
• End cap, center tube and media are thermally bonded as one integral component for added strength

Benefits

• High flow capability
• Lower overall operating cost
• Reduced waste disposal
• Longer filter runs for fewer change-outs
• Increased contaminant removal
• Operator friendly

Applications

• Reverse Osmosis Pre-filtration
• Municipal Drinking Water Filtration
• Commercial/Residential Drinking Water Filtration
• Desalination Pre-filtration
• Industrial Water Filtration
• Cooling Tower Filtration
• Chill Water Loop Filtration
• Food & Beverage Filtration
• Marine / Aquatic Filtration
• Marine/Aquatic Filtration

Specifications

• Micron Rating : Nominal micron rating 20
• Filter Media : nominal pleated Polyester-Plus
• Center Tubes : ABS or PVC
• End Caps : Pliable PVC with sealing surface built-in.
• Temperature : 140F (60C) temperature limit.*
• Shrink Wrap : Standard for all antimicrobial cartridges.

*Temperature limits vary and depend on pressure and time under load.

Sizing Guide

• Nominal Micron Rating : 20
• Media (sq ft) : 40
• Recommended Flow Rate* (GPM) : 35
• Length (in) :9-5/8 in
• O.D. (in) : 7-3/4 in

*Harmsco recommends operation at 70% of maximum flow rate for optimum performance.

1 Filter Per Case

The Harmsco HC/40-20 Hurricane 40 Cartridge 20 Micron features Pleated Polyester-Plus filter media providing higher flow rates and lower initial pressure drop. Pleated surface area provides higher loading capacity for longer filter life and increased particle removal.

Features:

• High flow capability
• Lower overall operating cost
• Reduced waste disposal
• Longer filter runs for fewer change-outs
• Increased contaminant removal
• Operator friendly
• End cap, center tube and media are thermally bonded as one integral component for added strength

Specifications:

• Micron Rating: Nominal micron rating 20
• End Caps: Pliable PVC with sealing surface built-in
• Filter Media: Nominal pleated Polyester-Plus
• Center Tubes: ABS or PVC
• Temperature: 140F (60C)

Applications:

• Commercial/Residential Drinking Water Filtration
• Municipal Drinking Water Filtration
• Reverse Osmosis Pre-filtration
• Desalination Pre-filtration
• Industrial Water Filtration
• Cooling Tower Filtration
• Chill Water Loop Filtration
• Food & Beverage Filtration
• Marine/Aquatic Filtration
• Industrial Coolant Filtration

Disclaimer: Harmsco is a registered trademark of Harmsco, Inc, which is not affiliated or otherwise associated with , Inc. or this site. , Inc. acknowledges and confirms that it has not been granted any license or authority from Harmsco, Inc to use the mark, and further confirms that any and all use of the mark on this site is for identification and descriptive purposes only and such use is not intended to, does not, and shall not be deemed to imply any association or affiliation between Harmsco, Inc and , Inc. of any nature whatsoever.