Axeon – NF3 Series Membrane Elements – NF3-4014 – 400 GPD Membrane Element

(Formerly R.O. UltraTec)

Manufactured using the industrys leading membrane film technology. NF3 Membrane Elements offer reliability,high performance, and deliver consistent results. NF3 Membrane Elements are one of the industries most reliable and highest performing nanofiltration elements. Advanced membrane technology and manufacturing processes ensure high quality and performance, allowing for improved system performance.

Improved System Performance
Superior Quality and Cost Savings
Individually Vacuum Tested
Made in the U.S.

Operating Limits

Membrane Type: Polyamide Thin Film Composite
Maximum Operating Temperature: 113F (45C)
pH Range, Continuous Operation: 2 – 11pH
Range, Short Term Cleaning (30 Min.): 1 – 12
Maximum Feed Silt Density Index (SDI): 5 SDI
Chlorine Tolerance: 0 PPM

Features

High Flow (HF)Membrane Material
Protective ABS Hard Shell
Made in the U.S.A.

Specifications

Axeon Part Number: 200404
Axeon Product Description: NF3-4014
Applied Pressure: 70 PSI (4.83 BAR)
Permeate Flow Rate: 400 GPD (1.51 m3/d)
Nominal Salt Rejection: 40-50%

Permeate flow and salt rejection based on the following test conditions: 550 ppm Softened Tap Water, 77F (25C), 15% Permeate Recovery, 6.5 – 7.0 pH Range, and the specified applied pressure. Data taken after 30 minutes of operation. Maximum pressure drop for each element is 13 psi. Minimum salt rejection is 40%. Permeate flow for individual elements may vary +/- 20%.