Econ Stennicator Proportional Pump 1:128 Medicator

The Stennicator is a compact, proportional pump for livestock operations requiring a dosage ratio of 1:28. It functions asa medicator and dispenses iodine, vaccines, acids, chlorine, electrolytes and more. The pump accepts a signal from awater meter providing a dry contact at a rate of 1 or 10 ppg or 1 ppl and injects directly into the water line. TheStennicator also features a signal repeater relay that can repeat the incoming signal to another Stennicator, controller orother device. When utilizing a house controller, the standby setting stops the pump from injecting but it still sends thewater signal to the controller.

• Compact and easy to install, the Stennicatoraccepts a pulse from a dry contact water meter.Adjustable to accept a signal from a 1 or 10 pulseper gallon (ppg) or 1 ppl (liter). The standby modecontinues to send pulse to house controller.
• Injects directly into line eliminating waterflow restriction
• Stock solution does not contact any moving parts
• Unaffected by water quality, scale or solids
• A second pump can be added to handle higherflow rates (5.4 gpm)
• Easily serviced with effortless tube replacement

One Stennicator is utilized when the water consumption is less than 3,000gallons per day at a water flow of 2.7 gallons per minute.Two Stennicators are utilized to achieve 1:128 dosing for water consumptionfor more than 3000 gpd at a water flow up to 5.4 gallons per minute.

Features

• On/off switch
• Brushless motor
• Totally enclosed
• 3-point roller design assists in anti-siphon protection
• Pump head requires no valves, allows for easy maintenance
• Self-priming against maximum working pressure foot valve not required
• Pump does not lose prime or vapor lock
• Pumps off-gassing solutions and can run dry
• Output volume is not affected by back pressure
• Easy to change pump tube; lubrication is not required
• All pump accessories included allow a fast and easy installation
• UL & cUL for indoor & outdoor use

Accessory Kit Shipped With Each Pump

• 3 connecting nuts 1/4″
• 3 ferrules 1/4″
• 1 injection check valve 80 psi (5.5 bar)
• 1 weighted suction line strainer 1/4″
• 1 20′ roll suction/discharge tubing 1/4″ white
• 1 additional pump tube
• 1 manual